Barrel & Container Pump
Barrel and Container Pumps >>
Barrel & Container Pump Barrel and Container Pumps
Type F424 - SeallessFeatures and benefits• Particularly suitable for transferring solvents and other fluids that do not glue, nor crystallize• Safe dry running of the drum pump• No wear on seals inner tube and helix shaped support bearings completely self-draining - thus preventing from any mixtures of liquids being pumped• No contamination of the liquid being pumped by shaft lubricants• Optimum barrel emptying due to ideal impellor design• To be stripped for cleaning with a minimum of effort• Version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4108 XFunctional viewThe inner tube supports the pump shaft, which is lubricated by the liquid. The level of the liquid in the inner tube always corresponds to that in the barrel or containerThe drum pump is available in• Stainless steel 316 Ti (S)• Polypropylene (PP)• Polyvinylidenfluoride (PVDF)Immersion lengths27", 39", 47", 60" (other lengths on request)Type F425 - For Drum Emptying Up to 99,98%Features and benefits• Remains of less than 0,05 l• Especially recommended for high-grade fluids (like e.g. used in cosmetic industry)• Optimum use of the liquid in Drum emptying, thus avoiding expenditures and/or cost in disposal• Ease of handling• To be stripped for cleaning with a minimum of effort• Version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4001 X• Authorized by Underwriters Laborytories Inc. (UL)Functional viewBefore the motor is switched off, the flowback stop valve at the pump inlet will be closed by operating the lever. This prevents the liquid flowing back into the empty Drum.The pump is available in• Stainless steel 316 Ti (S)• Polypropylene (PP)Immersion lengths27", 39", 47", 60" (other lengths on request)Type F426 - For Mixing and/or PumpingFeatures and benefits• Suitable for pumping and/or mixing of almost every fluid (e.g. water-based paints)• With reliable mechanical seal• Optimum barrel emptying due to ideal impellor design• To be stripped for cleaning with a minimum of effort• Light and handy design - version in stainless steel without additional mixing collar• Version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4001 XFunctional viewBy turning the adjusting lever, the pump can either be set to "mixing" or "pumping". Liquids can also be mixed even when being transferred to another container.The pump is available in• Stainless steel 316 Ti (S)• Polypropylene (PP)Immersion lengths39" and 47" mmType F427 - Sanitary Version For Aseptic ApplicationsFeatures and benefits• All wetted parts are made of stainless steel, ETFE or PTFE• To be stripped for cleaning and/or sterilization with a minimum of effort• No contamination of the liquid being pumped by shaft lubricants• Optimum barrel emptying due to ideal impeller design• Also available in 3A versionFunctional viewThe sanitary drum pump can be stripped down within a few seconds because of its ingenious design. The F427 does not have any inaccessible voids. This allows you to completely clean the pump at any time.The pump is available in• Stainless steel 316 Ti (S)Immersion lengths27", 39" and 47" mmType F430 - With Mechanical SealFeatures and benefits• Unique barrel pump design in PP and PVDF throughout the world: a steel cored inner tube provides the ultimate in stability and extended service life of the mechanical seal - even at high temperatures• Sealed inner tube, the liquid being pumped cannot enter the inner tube• Suitable for transferring almost every low viscosity fluid• Optimum barrel emptying due to ideal impeller design• To be stripped for cleaning with a minimum of effort• Version in stainless steel tested and certified according to ATEX-Directive 94/9/EC, category 1/2, for use in Zone 0 - EC-Type-Examination Certificate No. PTB 00 ATEX 4001 XFunctional viewThe inner tube houses the shaft, sealed by a mechanical seal. Consequently the shaft does not come into contact with the liquid except for the small section between the impeller and seal.The pump is available in• Stainless steel 316 Ti (S)• Hastelloy C (HC)• Aluminium alloy (AL)• Polypropylene (PP)• Polyvinylidenfluoride (PVDF)Immersion lengths20", 27", 39", 47", 60", 72", 79", 98", 118" (other lengths on request)
Copyright©2013.PT Winston Indonesia.All right reserved
Select Country :
Sat Aug 19 2017 12:28 PM
|
English
Jasa Pembuatan Website By IKT